1/10 R/C BBX (BB-01)

1/10 R/C BBX (BB-01). Kommer som byggesett.

540 motor medfølger. Må kompletteres med:

• Radio og mottaker
• 4.8 ~ 7.4kg servo eller sterkere, eller både sterk og vanntett
• Fartskontroller
• NiMH batteri
• Batterilader
• PS Lakk

Anbefales:

• Kulelagre

 

Fra produsenten:

Length: 414mm. Image shows painted and assembled kit.

BBrilliant This R/C model assembly kit is inspired by single-seater racing buggies popular in America. The slim chassis utilizes a lengthwise battery pack and rear-mounted, transverse motor, and ensures optimum weight balance and precise rigidity. The 4-wheel independent suspension uses front double wishbone and rear trailing arm setups to allow dynamic off-road performance. It employs safety nets, a roll cage equipped with light pods, six-piece body cowling featuring a long nose, and aluminum dampers.

 

The BB-01 Chassis The BB-01 is a rear-wheel drive buggy chassis which features a hybrid lower deck-roll cage and suspension structure for a super-realistic look. Lengthwise battery pack and rear-mounted motor give the rear wheels plenty of traction, while the sealed gearbox has a built-in ball differential. The suspension utilizes an A-shaped arm front double wishbone setup featuring a skid angle of 25 degrees, and rear trailing arms for alignment adjustment, plus high-spec, high-quality aluminum aeration oil dampers for all four wheels. Tires are front rib pattern tread for directional stability and rear square spike for high grip, and are paired with front and rear metal-plated, hex-hub wheels. Access the motor easily under the liftable rear roll cage section.

 

★Take a look at this classy new buggy from a different angle!

★This image shows the model without its body parts, giving a xloser look at the realistic roll cage chassis.

★The steering uses a 3-piece tie-rod setup with hi-torque servo saver. Note that a low-profile servo is required.

 

★Front A-arms have a skid angle of 25 degrees, and are paired with aluminum oil dampers.

★Plated wheels have a classic design, and are paired with ribbed front tires.

★Rear trailing arm suspension allows adjustment of alignment. Universal drive shafts are standard.

 

★Rear wheels utilize square spike tires with a realistic high profile.

★The battery pack is positioned in the chassis center. Remove the nose cowl and a stopper pin to access it.

★Remove screws to let the rear roll cage section flip up and give access to the motor.

 

★The front bumper is angled to help deal with tricky off-road surfaces.

★The BBX features plenty of suspension stroke and tread, which translates into excellent off-road performance.

★A flat undersurface minimizes the potential for the model to be slowed on rough surfaces.

 

★Left: Plastic side guards help protect suspension components. ★Right: A driver figure and cockpit side netting add another layer of realism.

 

★Left: Take a look at the six-part body! ★Right: If you so desire, the rear can be fitted with separately sold spare tire when the model is on display.

 

Specifications ★Length: 414mm, width: 233mm, height: 136mm ★Wheelbase: 283mm　★Tread: 196mm (front), 202mm (rear) ★Lower deck and roll cage chassis ★Rear-wheel drive ★Ball differential ★3-piece steering tie-rod ★Suspension: front double wishbone, rear trailing arm ★Tire width/diameter: 30/92mm (front), 38/96mm (rear) ★Aluminum cylinder aeration oil dampers ★Gear ratio = 12.42:1 (using kit 18T pinion gear) ★Type 540 motor (with shaft of over 10.5mm) and electronic speed controller (ESC) are sold separately.

 

Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of August 24, 2023. Specifications are subject to change without notice.